HifiBerry DAC+ ADC (Pro) case for RPi 4
Description
Case for a Raspberry Pi 4 with a HifiBerry DAC+ ADC or HifiBerry DAC+ ADC Pro hat. Designed in OpenSCAD. With the provided OpenSCAD files, it is easy to modify for other HifiBerry models. Comes in three variants: - one with a print-in-place hinge - one with a sliding cover. - one with a sliding top cover and two XLR/Jack combo plugs # Sliding cover The sliding cover variant is easy to print in any material, without supports, at 0.2mm layer height or smaller. Be sure to enable 'Detect bridging perimeters' in your slicer. For the sliding cover, 'detect thin walls' makes the thin plates that screw to the raspberry pi just a little bit stronger. The sliding cover screws shut with just the nylon spacers, nuts and screws that come with the HifiBerry. See the instructions below. #Hinged The hinged version is a single print in place print that allows for easy access to your hifiberry, and allows for extra cooling capacity by just opening the case. Enable detect bridging perimeters, and use paint on supports to add support for the SD-card slot only. Note that the hinged version in the pictures is a slightly earlier model then the one included here. The model included here is an improvement, with a better fit. It has not been test-printed yet, so if you encounter problems, be sure to send a message. #XLR/Jack combo connectors If you want to make the XLR-version, you need the following components: - two Neutrik combo xlr/jack connectors, either the NCJ6FI-S or the NCJ6FI-S-O. - four Neutrik plastic A-screw-1-8 s, or other similar 2.9mm parker screws, about 8-10mm length. - jumper wires/dupont cable - a soldering iron and tin. Future improvements could be: - the hinge version properly tested - variants for more types of HifiBerries - the front of the XLR one is moved closer, and the top has been improved. A better regular version should arrive soon. - make the XLR version screw together with more Neutrik A-screws, since you're likely to order more than four anyway.
Statistics
Likes
29
Downloads
0