Rolladengurt Einlauf / Shutter belt inlet
Description
English version below. <h1> Hallo Miteinander, </h1> das hier ist ein Einlauf für den Rolladengurt falls der aktuelle kaputt oder keiner vorhanden ist. Meine neue Wohnung besitzt leider keine und so raspelt der Gurt die Frisch aufgetragene Farbe in nullkommanix ab. Was natürlich sehr ärgerlich ist und auch nicht schön aussieht. Das ganze ist in 2 Teile gesplittet damit der Gurt nicht demontiert werden muss. Nach dem Drucken werden beide Teile um den Gurt zusammengesteckt und mit Schrauben an der Wand befestigt. Maße bitte der Zeichnung entnehmen. Was ihr benötigt: - Holzschrauben mit Senkkopf Ø4mm 2stk. <h1> Hello everyone, </h1> this here is an inlet for the roller shutter belt if the current is broken or none is available. My new apartment unfortunately has none and so the belt rasps the freshly applied paint in no time. Which is of course very annoying and also does not look nice. The whole thing is split into 2 parts so that the belt does not have to be disassembled. After printing, both parts are put together around the belt and attached to the wall with screws. Dimensions please refer to the drawing. What you need: - Wood screws with countersunk head Ø4mm 2pcs.
Statistics
Likes
2
Downloads
0