Dual Front Panel Socket with XT60 and Balance Port
Description
Front panel mount that holds two standard size panel mount USB chargers, cigarette lighter sockets, and a 16mm master push button switch, with two XT60s, and a balance port 4s to 8s configs. Files will also include a cut template for both the 4s and 8s. If you are going to switch more then 10 amps with the switch, be sure to add a relay. To hold the XT60 in place, we used just a bit of superglue around the base of the connector that slides into the front panel Connectors used for Balanced port: https://www.amazon.com/gp/product/B07ZK5F8HP/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 New style XT60 required, this will not work with the old ones: https://www.amazon.com/gp/product/B07Y37X6L7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 16mm Push button switch: https://www.amazon.com/gp/product/B07V72TR6N/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 USB Charger suggestion: https://www.amazon.com/Charger-CHGeek-Waterproof-Voltmeter-Motorcycle/dp/B07F84VVB4/ref=sr_1_11?dchild=1&keywords=usb+qc+3.0+panel+mount&qid=1612795294&sr=8-11 Lighter socket: https://www.amazon.com/Cigarette-Motorcycle-Receptacle-Waterproof-ZHSMS/dp/B07H1MGWFN/ref=sr_1_1?crid=8AM3XDYX687G&dchild=1&keywords=12v+lighter+socket&qid=1612795322&sprefix=12v+lighter+socke%2Caps%2C178&sr=8-1 Wire used for Balanced connections: https://www.amazon.com/gp/product/B07PPT11QN/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1 Screw set, this panel uses M2 screws: https://www.amazon.com/gp/product/B07H4MG7TC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 For more information, see our battery box build we did with this front panel: https://www.youtube.com/watch?v=ThO1t5pHhoI&ab_channel=Today%27sProject NOTE Design has been updated since the video for a better balance port, the original design was difficult to glue the balance port into the panel.
Statistics
Likes
1
Downloads
0