Honda VFR800 Xenon adapter
Description
This is a simple adapter to make xenon bulbs fit to VFR800. Original H7 halogen bulb requires an additional spacer so this is to make xenon bulbs fit. Works with most aftermarket H7 xenon bulbs, tested with eBays cheapest ones. This should work for most motorcycles/cars that have the H7 bulb spacer. One and a half hour test drive, didn't deform/melt, even when printed with PLA and 50% infill. The trace for cables is 2mm wide while the cable is 3mm wide, so it requires bit force to push cables trough the trace. With my printer, its pretty much perfect fit, design is made with 0.2mm tolerances, so it should fit even if printer is not that closely calibrated. And when the only force its forward it doesn't have to be perfect.
Statistics
Likes
0
Downloads
0