Bigtreetech Smart Filament Encoder Sensor CR-10S Pro mount
Description
This is a mount I created to use the Bigtreetech Smart Filament Sensor encoder wheel with a CR-10S Pro. Directions: Remove the stock filament sensor. Place the mount over the filament sensor mount posts, they will align. Use 4 x M3x6mm flush-mounted screws - I've added a bevel so that they sit flat and do not interfere. If you like a filament guide, I've provided a replacement cover that has one built in with a enough room for the metal coupler and bowden tube. Otherwise feel free to use the original cover. There is a enough room for the extruder lever to move freely and a cutout to allow you easy access to it. Note: supports will be needed for the cover. You dont need supports for the mount body. Hardware required: Bigtreetech Smart Filament Sensor device (remove the internal mechanics and the couplers) 4 x M3x6mm flush-mount screws 1 x 608zz or 608rs bearing for optional cover
Statistics
Likes
3
Downloads
0