Print in Place - Cat/Dog Door
Description
Hello You all! I'm actually studying at Politecnico di Torino! !! Your printer should print at least 165x165x100 !! This is a cat/dog door you can use after drilling your home door or directly when building your pet's house. Print: - 1 x printable in place door - 4 x door locks You will also need: - 4 x 3mm screws You'll need a hole large at least 140 mm and the wooden board should be 20 mm deep. I personally used PLA but you can also use ABS or others. Thanks for downloading!!!
Statistics
Likes
9
Downloads
0