Voron Afterburner Bowden Mount Bl Touch Ender 3
Description
Mount for bowden version of Voron Afterburner for Creality Ender 3/CR printers with cable attachment. - Removed unnecessary material to save some weight and material - If you need other modification, just write me, but step file is included # UPDATE v2.1: - added holes for mounting accelerometer - changed position of cable attachment in hole on the back from top to bottom # UPDATE V2.2: - asymmetric cable attachment holes - fixed hole # SETTINGS Probe X offset from nozzle: +39mm Probe Y offset from nozzle: +8mm # KLIPPER (essential) [bltouch] x_offset: 39 y_offset: 8 [bed_mesh] mesh_min: 23,6 # i have very thin clips on my bed ... if you have bigger just add 1-5mm to second value mesh_max: 230,226 # if you have bigger clips than me :-) just subtract 1-5mm from second value [stepper_x] position_min: -16 position_endstop: -16 [stepper_y] position_min: -15 position_endstop: -15 # Notes - **Think twice** before choosing **direct drive with single z-axis** unless you need to print flexible filament. With latest versions of klipper pressure advance works fine with bowden setup and also with stock creality melzi 1.5 (tmc2208 in legacy mode) even though SKR (mini, 1.3. etc) should be preffered (and cheaper) choice - Take care when wiring heater cables to make space for BL touch (still not in ideal position) - Print with support otherwise follow voron manual print settings (minimal settings are ok for afterburner to save some weight) - Screws ...use BHSC (button head) on left side and fully screw down to hide them (5/6mm) - I will add klipper profile later - for accelerometer attachment you can use BHSC 6 or 8mm screws # Remixed: (sorry, remix picker/searcher doesn't work, will try it later) https://www.thingiverse.com/thing:4614384 https://www.thingiverse.com/thing:4638150 (use bl touch mount and probe offset from here)
Statistics
Likes
27
Downloads
0