(Weighted) Apple Stand for Apple Watch + AirPods Pro
Description
Hi Everyone! This is my take on a combined Apple Stand for Apple Watch and AirPods / AirPods Pro. Designed for Apple Watch 5 44mm and Airpods Pro I searched for a long time but didn't find any that satisfied me 100%. So here's my take. Feel free to like and comment :) Features: - Weighted Base (space for up to 40x 5ct coins) - No Support needed - Angled Watch Dock to comfortably read the time - Apple Logo at the front - Assembly holes - Easy cable management - Disassembly holes - Fits with Solo Loop Recommendations: - The fittings are intentionally very tight. You might have to sand the holes for the chargers a bit (still quite unlikely). - I would print at a low layer height, to get the smoothest finish possible (printed at 0.12, but 0.2 should also be fine). - I recommend printing quite slow. At least the outer walls, bc of the Apple Logo. I sliced with cura and set the speed of the outer walls to 30mm/s - Add a Pause before the holes get covered, to easily add the coins. - Infill @15% should be more than enough
Statistics
Likes
17
Downloads
0