Shooting Chrony F1 Inverted w/ 1/2" and 5/8" tube
Description
**WORK IN PROGRESS** My old shooting chrony was looking sad. It had a broken diffuser from being kocked off by the wind, and I was tired of setting it up when I got to the range. I just wanted a sturdy one piece chrono that I can throw in my car and set it up and go. For the diffusers I'm using a 1/4" plexiglass that was sand blasted. I need to cut it down a little more since they are too long right now. I'll add more information soon on the tube lengths. PRO TIP: The Shooting Chrony F1 is capable of displaying the Highs, Lows, Averages, Standard Divination, etc. similar to their more expensive models. HOWEVER, they simply left of the button that is to the far left that actually does that! So you can simply solder a push button in place and get that functionality. If you don't want to do that you can make a cable with a button and just plug it into the headphone jack. The case I designed for the electronics has a hole in it for a 13mm long push button (6x6x13mm). https://www.amazon.com/QTEATAK-Momentary-Tactile-Button-Assortment/dp/B07VQF8P2Y/ref=sr_1_2?dchild=1&keywords=push+button+6x6x13&qid=1613007670&sr=8-2
Statistics
Likes
1
Downloads
0