"Chewey_GLK-17_Q1" Oculus Quest 1 VR pistol grip
Description
IMPORTANT: This is NOT a gun or any parts that would make a functional firearm. It is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 1 controllers. If you are looking for the Quest 2 version, [see here](https://www.thingiverse.com/thing:4747135). WARNING: This is a difficult print that requires a very well calibrated printer. Do not use PLA or any similarly brittle material since the grip requires a slight flex to provide friction fit by design. Print at your own risk of failure. Introducing the "Chewey_GLK-17_Q1"! For more details, please refer to the [Quest 2 version's descriptions](https://www.thingiverse.com/thing:4747135). The picture is from the Quest 2 version, however, everything is the same except for the sizing of the hollow to fit the respective controller. In addition to the reference models I noted in the Quest 2 posting, this Quest 1 model also uses the 3D scanned controller image posted by user [aolshove here on Thingiverse](https://www.thingiverse.com/thing:3729872). Each hand controller needs: - 1x Grip - 1x Slide - 1x Front lower - 2x Screws Assembly notes: - One screw is used to join the Grip with the Front lower. These were separated for ease of printing. - One screw is used on the side to secure the Slide in place in case it slips off while mid VR session. NOTE: The grip STL is for the RIGHT hand. Simply mirror it to print for the LEFT hand. Derivatives and remixes are under Attribution-NonCommercial-ShareAlike, but please also include its original name "Chewey_GLK-17_Q1" somewhere on the final design. Thanks!
Statistics
Likes
211
Downloads
0