APC AP9233 LCD front case
Description
The design is as close as possible to the original housing, if you have the original buttons and led difussers are a straight drop in with my design, except the screw holes that need drilling. Printed with my Ender 5 Pro with the below settings: 0.2 layer 100% infill 88.0% flow (calibrated flow from my extruder) speed 20mm/s for the first layers, and manually speed to 150-200% supports ON with 4 lines of brim, just to be on the safe side. the screw holes are not opened, i left if on purpose for best fit possible. Notice the holes on the buttom of the buttons, those are for carbon contacts, i had a old broken remote, and i designed the holes to match of the remote.
Statistics
Likes
1
Downloads
0