Filament Drybox for Wildone Food Storage Container 4L
Description
I wanted more dryboxes for my regular rotation of colors and the Rubbermaid containers are really hard to find and quite expensive now. I found some great containers on Amazon and designed a platform in Tinkercad to hold a TUSH roller centered and stable while also being adjustable. Print Settings: Layer Height 0.20 - 0.28mm (did mine with 0.28) ***3 walls minimum*** CHEP Rough Profile works fine as long as you set wall count to 3 or more Infill 15-20% Supports may be needed for the TUSH-Brace pieces for the M3 nut cutout depending on your printer's bridge performance. Instructions: Print (4x "TUSH-3mm Wall") -OR- (2x "TUSH-3mm Wall" and 2x "TUSH-1mm Wall") for a little more room for wider spools - tested with 68mm wide Overture spool. Print 1x "WildoneDryboxPlatform" Print 2x "TUSH-Brace" Print 1x "TUSHStablizerRod" You will need: At least 1: Wildone Airtight Cereal Storage Container 4L/135.3 Oz - https://www.amazon.ca/dp/B07L2QJ5LB/ref=cm_sw_r_cp_apa_i_C9RV7M231F2JW1GS21EA https://www.amazon.ca/dp/B07K3TPQ86/ref=cm_sw_r_cp_apa_i_TXQ42DHYDCAHRSQYFH4K Edit: These appear to be the same container design available from the US site -> https://www.amazon.com/dp/B08PZBL1KD/ref=cm_sw_r_cp_awdb_imm_t1_4NNF1XFGCS602WSHSKKQ?psc=1 4x 608 bearings 2x M3*8 Machine Screws 2x M3 nuts For the TUSH-Brace file - I used https://www.thingiverse.com/thing:2781034 as a source for the M3 nut cutout. Thingiverse gave me an error when I tried to credit multiple things. For the Silica Canister I used - https://www.thingiverse.com/thing:2070351
Statistics
Likes
28
Downloads
0