Spice Rack with Drawers (Stackable)
Description
** Summary ** This is a 2-drawer spice rack that is stackable with adjacent units to form a full tower. I have printed two sets, so I have 4 drawers total. Each pair of drawers holds 12 spice jars. The entire thing is assembled with M3 6-8 mm length screws (the entire thing can be assembled with a single length of screw). No tapping should be required, but depending on your filament you may want to pre-tap to reduce the chance of cracking. All pieces are labeled with the required print quantity to make one spice rack. 2x_(etc) means that the file must be printed twice to yield a full spice rack. ** V2 Spice Rack ** The V2 design contains several improvements over the V1. Notably: - The side rail profiles are fixed to tolerance the holes properly, - The datum pins for the side rails can now be printed and clearanced without support or cleanup - Side rails are labeled "Left" and "Right" - Top/Bottom plate has been thinned to reduce plastic usage A full 2-drawer set now takes about 0.65 kg to print ZIP contents are as follows: | Folder | Description | | ----------- | ----------- | | cura_3mf | .3mf files from my Cura including layout and print settings for Ender 3 Pro with Hatchbox PLA | | creo_asm_v2 | Creo Elements assembly .prt files and .asm file | | stl | STL files | | STEP_AP214 | Spice rack part files in STEP format (AP214 formatted) output for CAD interchangeability | | solidworks_export | Export in solidworks part format - I don't have solidworks so no guarantees | | nx_export | Export in Siemens NX .prt format | ** V1 Spice Rack ** The V1 design was my first attempt at this, I am including the files in case they are useful. Please don't print from this ZIP file.
Statistics
Likes
120
Downloads
0