Simple 8x8 LED Matrix Light/Clock
Description
# Sunrise Smart Light Arduino WIFI Clock to animate LEDs with the sunrise. Based off the [NTP Client](https://www.arduino.cc/en/Tutorial/LibraryExamples/Wifi101UdpNTPClient) sketch provided by Arduino, and using the [Dusk2Dawn library](https://github.com/dmkishi/Dusk2Dawn), modified to run on an ESP-12E. [All Project Files on GitHub](https://github.com/TylerGriggs/Sunrise_Smart_Light)  # Materials - ESP-12E (and Micro-USB cable) - LED Square 8x8 - OLED IC2 32x128 Screen - Push-Button Microswitch - 3D Printing Filament # Print Settings and Instructions ###### Top (for translucent effect using just white) - Wall Count: 1 - Top Layer Count: 12 - Since the top is printed upside down, the top will be connecting to the base. - Bottom Layer Count: 4 - Infill: 10% - Infill Pattern: Cubic - Brim (In/Out): 8 - Trim the outer brim, and optionally leave the inner brim for softly lit edge. ###### Base Whatever settings you prefer, I used: - Layer Height: 0.3mm - Infill: 30%
Statistics
Likes
2
Downloads
0