Parametric Magnet Strike
Description
<h1>Parametric Magnet Strike</h1> This is a customizable magnet strike, you can use this to attach any size of flat round magnet to 2020 or any other size of extrusion as well as wood cabinets, etc. The base and wall thickness is customizable as well as the wall thickness on the outside of the magnet. The fastener type can be changed from counterbored to countersunk and the thread and head diameter of the fastener can also be changed. For the fastener customization as well as clipping function I used code from Rohin Gosling's Parametric Hinge design. <h3><b>Parameters</b></h3> * <b>Strike Plate Thickness</b> Sets the thickness of the material around magnet on the strike plate. This should be a multiple of your line width. * <b>Base Gauge</b> Sets the thickness of the base material * <b>Wall Gauge</b> Sets the sidewall bracing thickness * <b>Fastener Head Type</b> Set to Counterbored or Countersunk to customize fastener hole * <b>Counter Sink Depth</b> Depth of counter sink for fastener * <b>Fastener Thread Diameter</b> Diameter for the shaft of the fastener * <b>Fastener Head Diameter</b> Diameter of the head of the fastener * <b>Object Size</b> The width and height of the bracket, must be greater than magnet diameter * <b>Base Depth</b> The depth of the base (the distance from the strike to the opposite edge of the base) * <b>Hole Inset</b> Offset of faster hole from center. Add positive number to move hole closer to strike plate, with zero it is centered * <b>Magnet Diameter</b> The diameter of the magnet * <b>Magnet Thickness</b> The thickness of the magnet
Statistics
Likes
13
Downloads
0