Case for LM2596S DC Buck/step down converter

Case for LM2596S DC Buck/step down converter

Description

Case for a LM2596S DC Buck/Step Down Converter. Designed with a viewing port allowing access to the LED voltmeter readout/LEDs and the function button as well as cut outs to access the voltage output adjuster and the wiring terminals. I printed at 0.2mm layer height from a 0.8mm nozzle and this was fine for the tolerances to allow the lid clips to fit. I set infill to 100% but in all honesty its that small and with a 0.8mm nozzle there are very few areas that need infill.

Statistics

Likes

1

Downloads

0

Category

Electronics