CCCB - Customizable Cabinet Cutout Box

Description

# Customizable cabinet cutout box - Author: *Ruben Coolen* - Date: *February 16th 2021* - Current version: *1.1* # Update 1.1 - February 17th 2021 - Added an option **fitting type** to choose a different fitting type: clamps (snap-fit). The clamps may not tighten your box very tightly due to different wood panel thicknesses. - Added an option **add edge** to add an extra 5 mm around the edges to cover any imperfections in the jigsaw hole of the wood panel. # Description This is a box made to extend a part of the back wall of a cabinet. This can be used for instance to allow for more travel for a heated 3D printer bed. Normal supports are needed for the 4 screw plates of the box. The lid doesn't need supports. **The photographs shown on this page are from a previous version without an inner shim and without nut catches.** # Pre-customized STL's There's some pre-customized STL's available: - Width x height: 100mm, depth 50mm, **no** nut catch - Width x height: 100mm, depth 50mm, **M3** nut catch - Width x height: 100mm, depth 50mm, **M4** nut catch - Width x height: 100mm, depth 50mm, **M5** nut catch - Width x height: 100mm, depth 50mm, **M6** nut catch # Customizable settings ### Render settings 1. What part(s) do you want to render? - Variable name: *parts* - Default value: *Box and lid* - **Options**: - *Box and lid* - *Only box* - *Only lid* ### Box settings 1. **Box outer depth** - Variable name: *box_depth* - Default value: *50* 2. **Box outer width/cutout width** *(required opening + 4x box thickness + 1mm)* - Variable name: *box_width* - Default value: *90* 3. **Box outer height/cutout height** *(required opening + 4x box thickness + 1mm)* - Variable name: *box_height* - Default value: *90* 4. **Wall thickness** - Variable name: *box_thickness* - Default value: *2* - **Options**: *range of 1 to 5* 5. **Screw plate thickness** - Variable name: *plate_thickness* - Extra information: thickness of the 4 screw plates on the box. - Default value: *3* - **Options**: *range of 1 to 5* 6. **Bore hole diameter** - Variable name: *plate_bore* - Extra information: diameter of the holes in the 4 screw plates on the box. - Default value: *4* - **Options**: *range of 3 to 10* 7. **Use a hexagonal nut catch in the screw plate** - Variable name: *nut_type* - Extra information: this setting adds a nut catch in the 4 screw plates on the box. This allows to insert a nut so that a bolt can be tightened from just the inside of the cabinet. - Default value: *No nut catch* - **Options**: - *No nut catch* - *M3 nut catch* - *M4 nut catch* - *M5 nut catch* - *M6 nut catch* 8. **Nut catch depth** - Variable name: *nut_depth* - Extra information: depth of the hexagonal nut catch. This is added to the screw plate thickness. - Default value: *6* 9. **Fitting type** - Variable name: *fitting_type* - Extra information: *use a snap-fit clamping system or screw plates? Warning: the clamping system might not be entirely tight, depending on your cabinet wall thickness. Warning: the wall thickness will default to 3 when this option is chosen!* - Default value: *Screw plates* - **Options**: - *Screw plates* - *Clamps* 10. **Add extra edge** - Variable name: *add_edge* - Extra information: *Add an extra 5 mm around the edges to cover the jigsaw hole.* - Default value: *True* ### Text settings 1. **Text to engrave into the back wall** - Variable name: *text_message* - Default value: *Customize me* 2. **Font size** - Variable name: *text_size* - Default value: *12* 3. **Text rotation** *(degrees)* - Variable name: *text_rotation* - Default value: *45* - **Options**: *range of 0 to 360* 4. **Text depth** - Variable name: *text_depth* - Extra information: *use a larger value than the wall thickness for a through-hole* - Default value: *1*

Statistics

Category

Tags