Accurate model for calibration dual print (0.1 mm)

Description

This Model Is For Sailfish Firmware (7.6/7.7) Upd Ver 2.0 - Complex Calibration For Every Directions Calibrationcircles_Base.Stl (Right Extruder): * Has 9 Circles Calibrationcircles_Offset.Stl (Left Extruder) * Has Number 7 * Has 9 Circles With Offsets (+0.1Mm Per Each Circle) * Left Circles: -X(0.1) / -Y(0.1) * Right Circles: +X(0.1) / +Y(0.1) ------------- Ver 1.0 - Simple Calibration For One Direction Only Calibration_Down.Stl (Right Extruder) * Has Number 7 * Step: 5 Mm Calibration_Up.Stl (Left Extruder) * Step: 5.1 Mm Text From: Http://Www.Sailfishfirmware.Com/Doc/Tuning-Dual-Extruder-Calibration.Html#X28-750005.2 5.2 Dual Extruder Calibration 9. ... The Values In Replicatorg’S Onboard Preferences Will Have Changed Unless You Entered 7 For Both X And Y, As Line 7 Represents The Ideal Offset Of 0.0 Mm. The Actual Lines Are Offset By By -0.6 Mm, -0.5 Mm, ..., 0.0 Mm, 0.1 Mm, ..., 0.6 Mm, Creating Thirteen Offsets Total.

Statistics

Category

Tags