Step Down Buck Board Voltage Converter Upgrade for Prusa i3 MK3 MK3s
Description
**NOTE** Part files are only available here (for free) on PrusaPrinters [PrusaPrinter Step Down Buck Board Voltage Converter Upgrade for Prusa i3 MK3 MK3s](https://www.prusaprinters.org/prints/56808-step-down-buck-board-voltage-converter-upgrade-for) **ABOUT** This cover clips into the Einsy case and supports a buck converter board. Wire the board input into your 24V power terminals on the Einsy, and set to 5V and wire the output to a Raspberry Pi 3 B+ or 4. **PARTS** Links to actual parts are available on [PrusaPrinters](https://www.prusaprinters.org/prints/56808-step-down-buck-board-voltage-converter-upgrade-for) LM2596 DC-DC Buck Converter M3 Nylon Black Hex Screw Nut Standoffs - 2x 12mm long This and some wire and the cover is all you need to bring the buckboard onto your printer. You can use this to power any peripherals up to the power draw of your buck converter. I chose to power a Raspberry Pi 3 b+ and TFT Touchscreen running Octoprint, pictured.
Statistics
Likes
5
Downloads
0