Flipped and Reinforced Bracket for IDE to SD adapter
Description
I didn't like how the power wires on other mounts for this ISA to SD adapter were positioned, so fixed it. Large cutout also saves print time. Two versions included: - BetterMount.stl = Requires an added 15 minutes worth of support material to accommodate the little winglet. You can cut this off in your slicer though if you desire. - BetterMount-Inverted-PCB.stl = Requires much less support material, but holds the pcb from the opposite side. The power wires still exit on the front. Any M3 screws will tap themselves in the holes. Search "IDE SD" on amazon and you should find a comparable adapter to original product photo above. I did not print the "inverted" version, so let me know if my measurements work or not.
Statistics
Likes
8
Downloads
0