Revised BigTreeTech PiTFT50 & TFT35, SKR, Raspberry Pi Case
Description
This is a remix of the incredible BigTreeTech TFT70, TFT35, SKR, Raspberry Pi Case by max_davis (Thing ID 4568324) that I have adapted to my own setup. The case includes space for an SKR 1.4Turbo, a Raspberry Pi with a buck converter for the Pi, and a Meanwell power supply to be mounted internal to the case. Putting the power supply inside required me to widen the case a bit, which was a good thing because I needed the room for two screens on the front. The front faceplate has been modified to hold a Bigtreetech PiTFT50 for the Pi, and a BigTreeTech TFT35 V3. ** 3-3-20: I updated the "screens.stl" and "PiTFT frame top.stl;" please download these new versions if you previously downloaded those files. The backplate has been modified for the power switch and a hole to route cables through. In Max's original design, the cables came through the right side of the case; however, since I've moved the power supply inside the case, that right side now has a hole for the power supply exhaust fan cover. Not all the parts you need are included here: You will still need the feet (bolts and nuts) from Max's original design and the rest of the printed parts that hold the case together. I have not printed all the parts yet (they are in progress as I write this), though I have printed the front and back, left and right side pieces (on my Ender 3) and mounted all the hardware. The photo is the actual guts of my printer at this point. I am printing the larger parts on a custom "Ender" built from an Ender Extender XL kit, which has a 400 x 400mm build plate. The larger parts will need a bed this wide. Some parts will need supports. If you print this, I'd love to see your build! Many thanks to Max for this amazing case!
Statistics
Likes
13
Downloads
0