Hemera Volcano 40x40 Fan
Description
this is my first upload i was creating a 3dprinter and i was stuck on a problem .the cooling fan to reduce the numbers of part i would like to use the same type of fan of the hemera 40x40 and a E3d Volcano hotend. and i make this. -The 40x40 fan tight fit -there is a BLtouch mount that need tuning height -the fan nozzle is center to the hotend -Mount screew fit to the 4 square nut hole My Setting: -Made on Anycubic Predator -You will need to drop it on the side to prin it -Layer Height 0.2 -25% infill -Raft -the model Need Support P.S. Sorry for the Quality of the Picture
Statistics
Likes
2
Downloads
0