PinTray BookStyle
Description
This box is designed to place the pins of a pin tumbler lock including key pins, the master wafers if any, driver pins, and springs for easy carrying of a dismantled cylinder. It closes very securely, no risk of unwanted opening. INSTRUCTIONS to build : 1/ Print both parts, 2/ Cut a 40mm long, 1.75 mm in diameter plastic filament (basically the same filament you printed the box with), 3/ Insert the wire as an axis of the hinges, 4/ Heat up the ends of the hinges (with a lighter or a soldering iron) to stick the wire in place
Statistics
Likes
4
Downloads
0