DIY dual channel bench power supply
Description
They are a lot of DIY bench power supply's out there, but I think I bring a different take on the matter. My design goal is the smallest possible footprint. I have a very limited working space and I want to be able to remove my equipment relatively easily if I have to. I was able to have a very small and capable unit with two individual power supplies using the Riden RD6012 and a DPS5015. More on the build project is on my blog. https://petrosprojects.blogspot.com/2021/02/diy-bech-power-supply-based-on-rd6012.html The Delta power supply is secured with a wedge piece that is designed to be a press fit, so it's bigger that it needs to, and you have to file it down until it a snug fit. Also notice that i have trimed the cable bracket from the power supply. The case is designed to have self supports in order to minimize the print time. Block supports everywhere except the front side where they are the two windows (see images). Print with the two circles pointing down as my images show. Print time: 1d 10h with 0.2mm res @ 100% infill
Statistics
Likes
3
Downloads
0