Universal silicon damper
Description
I created a simple and universal silicon damper for the heat bed instead of springs. The diameter of the dampers is 18mm, the height can be adjusted by different sizes of the top parts (I uploaded from 16 to 24mm height parts). To assemble you need 4 M3 screws with the apropriate lenght and 4 M4 nuts. For the bottom part you need 4 M3 brass inserts and put them inside with your soldering iron (diameter 4mm brass inserts), then you can screw M3 screws from the top to have your holes for the heatbed screws. Fill the 4 dampers with your prefered silicone to the top and enjoy your new heat bed dampers which are a way better than normal springs.
Statistics
Likes
8
Downloads
0