HP Reverb G2 VR Eye Cups / Lens Covers
Description
Cups for the HP Reverb G2 lenses. I am told that the special Fresnel lenses in VR headsets can amplify and focus light coming in at the correct angle and burn out the very expensive displays inside the headsets. These cups cover the lenses when the headset is not in use and keep light and dust off them. I printed mine in TPU as it is soft and flexible but really any material is fine. The thin "strap" between the two eyes is thin enough to where it should have some flex if printed in a non-flexible material. This strap area is designed to bend a bit so you don't have to change the IPD adjustment on the headset in order to use the cups. They are printable without the use of supports if printed in the orientation shown.
Statistics
Likes
12
Downloads
0