Anycubic i3 Mega X-Carriage [MK4] OMG_V2 Dual Drive+NFCrazy

Description

Added a combined Hotend for: Mellow NF-Crazy HighFlow 550°C (see Aliexpress, https://grabcad.com/library/nf-crazy-plus-hotend-1) OMG V2 Dual Drive Extruder (see Aliexpress, https://github.com/my3dltd/OMG-V2-Extruder/blob/master/OMG%20V2.pdf) BLTouch or Clone Using only the Extruder and hotend, removing mount of hotend, using screws instead. This way it gets closer together. Print each part once with settings as on X-Carrier. Drill 4mm through the "Pipe" and fill it with short PTFE tube. Push it into the Extruder until the tube hits the extruder, leave 1mm outside the Tube and cut PTFE tube. Mount then the NFCrazy Hot-End onto the Tube. You can unscrew the Hotend and slide it down in case of required Maintenance (don't know if needed) WITHOUT completely unmounting it. Use Hextool sticking through the Fan to unscrew. Worked on my Nocturna Fan. Screws needed: -3pcs M3x16mm for Top on Extruder and Bottom on Fan. -2pcs M3x25mm for Fan mount. -2pcs M3x20mm or 25mm for for NFCrazy mount. Plus the normal screws of the X-Carrier. Printed in PETG. Use Anycubic I3 Mega X-Carriage MK4 rear mount. Work in Progress, bringup coming soon. Originally posted and updated here: https://www.thingiverse.com/thing:4772109

Statistics

Category

Tags