Horus x10 Tray
Description
This is a Tray for the Horus X10 radio. You can print it in any material you choose, I recommend using TPU(or some type of flexible material for any thing you see printed in orange in the photos. Some of the prints need to be printed multiple times, in the print name you will see the number of times it needs to be printed(if more then one is required). The tray pads will need to be glued to the tray. The holes are all sized for M4 Bolts and nuts. I printed everything on a Prusa MK3s, if your print bed is smaller the a Prusa, you will not be able to print all the parts. Credit to Charlie1982 for the Carabiner design https://www.thingiverse.com/thing:1008943
Statistics
Likes
1
Downloads
0