Cooler for the EKWB backplate for the EVGA 3090 FTW3 Ultra
Description
Cooler for the EKWB backplate for the EVGA 3090 FTW3 Ultra. Uses 5x60mm/1cm fans. 6mm M3 and 10mm M2.5 screws to hold things together. M2.5 12mm to screw it to the 3090. Do not use PLA as it gets soft at 60C. PETG (80C) or ABS (100C) required. Could be used with standard backplate but only the outermost screws would hold it in place. Empiricus@Dremomys
Statistics
Likes
8
Downloads
0