3dsets Rancher exhaust
Description
Scale exhaust for https://www.3dsets.com Rancher line Mounts to existing holes in the chassis. There are two different exhaust tips included, an angled one like in the pictures and a straight one. The 90degree tubes can be mounted either way, so you can decide if you want more hidden exhausts (like in the pictures) or more prominent, protruding ones. You'll need 6 aditional Screws and a 3mm drill for assembly 4x M3x8 2x M3x16 instead of the 2xM3x12 on the chassis. you'll need an allen key to get the screws inside the muffler. The holes in the muffler have sacrificial layers so they can be printed without supports - just drill them with a 3mm drill ***Print Orientation: IMPORTANT:*** I did a quick export of F360 and the parts are not oriented correctly for printing. They should be: * Muffler: upright on its side * 90°tube: upright * tips: upright - be aware that the angled tip is exported a bit tilted, should be put laying flat on the bed. I'll fix it soon if I have time
Statistics
Likes
36
Downloads
0