Panther: fursuit head-base, eyes and teeth
Description
this head has a walkthrough (pictures and text) https://imgur.com/a/0cqu5d7 (it's fine to sell fursuits made WITH this, but you may not sell the base itself) More bases coming soon, just need to get test prints finished and photos taken. In my sample photo, the nose is printed a bit larger than default. Depending on the look you want for your head, it's safe to print the nose a little larger or smaller than the rest of the head. -the "talk jaw" should probably not be made with rubber bands, I'm just doing this to keep my prints together until I start assembling the heads. print at 240-250% for all parts, you may want to print the eyes smaller if they're sitting too snug for you it's a good idea to do a smaller test print first, to make sure you're happy with your settings. -FOR ENDER: a pre-cut version of the "top" head sections has been added. --% for these is the same as everything else. --the "A" portion will need one as-is and one flipped print --I glue my prints together with "fabritac" fabric glue and then reinforce the seams with hot glue from the back I maintain an info document here: https://docs.google.com/document/d/1Nij-ovIhcxOxUT8PBZgI4saLcwwqKpIGH8ICAw7E2Uw/edit?usp=sharing this will answer most questions, and I can be contacted on twitter for more help. I'm using the googledoc, so I can easily update the information across multiple posts.
Statistics
Likes
98
Downloads
0