Luer Lock M/F Cap
Description
Double-ended Male/Female Luer Lock Cap. In the image the red parts are printed in FDM while the blue ones are the original injection-molded part. Fully 3D-printable in FDM in both orientations, no supports required. Optimized for a 0.4 nozzle, 0.15 layers or *less*. WARNING: the seal likely won't be air-tight due to imperfections in the printing process. Liquid can also penetrate between micro-fissures between the layers. You must consider if these limitations can affect your experiment. Cooling and material is extremely important when printing this part accurately: PETG or PP recommended. Always print multiple copies to ensure the material doesn't overheat while printing. Using a SLS/SLA process *should* result in an air-tight part. A big shootout to [this page](https://www.sedgeochem.uni-bremen.de/luer%20connector.html) which provided a good basis for the measurements.
Statistics
Likes
8
Downloads
0