DNA75 BoxMod 18650 Armored
Description
Ok so.. this is a first version of this box mod. If you want, I will design a magnet flap. now is on screw. Customized battery contacts. I made room for the contacts, there is about 1.5-2mm space for the clamping mechanism. Connector: https://pl.aliexpress.com/item/33016655543.html?spm=a2g0o.productlist.0.0.1ff73a83ypY4Go&algo_pvid=a6482470-e0e2-4b3e-814a-9e7c7e54f640&algo_expid=a6482470-e0e2-4b3e-814a-9e7c7e54f640-1&btsid=2100bde116147957048793379e9150&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ DNA75: https://www.evolvapor.com/products/dna75 4 M3x10 hex screw 4 M3x20 hex screw 4 M3x7 hex screw And 3 micro screws for DNA75 like 1mm diameter. There are no rails for the screen in this version yet. I didn't make them because mine was beaten. A screen holder from Hcigar VT75 fits. If i buy a screen i design the rails. The project will be further developed and refined. I recommend printing with 0.4 / 0.3 nozzle. I printed 0.5 and unfortunately the corners were not fully printed, so you can see the screws twisting the body.
Statistics
Likes
2
Downloads
0