2020 Extrusion Power Supply Mount (JGY-200-12)
Description
I have a very esoteric Chinese power supply (JGY-200-12) that I wanted to get off the desk, and hide the (very) unsafe exposed terminals. I also wanted lots of room to hide away a buck converter inside the case. It fits a number of different PSUs because it doesn't use screws to secure the PSU, instead it has an inner lip the PSU can just sit on. It's designed for a 100mm x 44mm PSU, but can fit any smaller PSU by padding the lip. It has two mounting screws and a guide to slot onto a 2020 extrusion, common on many 3D printers. Fits M3 screws, but smaller screws will work as well. **Required Parts:** - JGY-200-12 PSU (good luck finding this, essentially disappeared off the internet) or any other 100mm x 44mm PSU. - ARQQ 15A 250V Rocker Switch - 2x M3 screws (rail mount) and 2x t-nuts. - 2x M2.5 screws for the rocker switch and 2x hex nuts
Statistics
Likes
1
Downloads
0