Snapmaker 2.0 Enclosure Wire Clip
Description
This is a print of the wire clips used in the Snapmaker 2.0 A350 enclosure used to hold the led wires on the enclosure. I needed a few more so I created these with Tinkercad. Tested on the A350 enclosure, but should work on the other sizes. You can tinker it yourself at: https://www.tinkercad.com/things/0C9hBLOSVFN-snapmaker-2-enclosure-wire-clip/edit Version 2 is an easier fit as the distance between the clip and the long side piece are a little further apart.
Statistics
Likes
21
Downloads
0