GeeeTech I3 ProB E3D V6 Mount with Dual Radial 5015F Fan
Description
I took inspiration from the original design by mnielsenau, but because I wanted more focused cooling directely at the nozzle the 40mm fans were replaced by radial fans. !! You will need relativeley long M3 screws to mount the fans !! !! The hole sizes are designed such that the screw will NOT thread into the plastic, but rather just can be fixed on the other side of the part with a nut, please scale them smaller if you don't intend to use a nut !! On the metal bracket that this print screw into please use the most distant set of holes from the axis rods, to ensure that the fans clear the parts of the z-Axis when homing. When using more than 20% fan speed the fans can overpower the hotend heater. I used aluminium foil and capton tape to direct the air away from the hotend. Probably a silicone hotend sock or a pla fan duct will also work.
Statistics
Likes
1
Downloads
0