Nike Air max LED
Description
Instructions : For bottom and cover : Print with 0% infill. Top solid layers : 0 Bottom solid layers 3 Outline/perimeters shells : 2 Pattern : 15% infill Top solid layers : 3 Bottom solid layers : 3 Outline/perimeters shells : 3 /!\ Regarding the pattern print, you can have a little bit of stringing, but you can remove it eaysily with a lighter. Then, you can drill a little hole on the back for the LED strip wire. Glue with hot glue the pattern with cover, and... that's it !
Statistics
Likes
16
Downloads
0