1/2 NPT [shower] to 1/4 barb

Description

1/2 NPT shower to 1/4 OD barb (ID of tube) this tread has a 1.78deg taper so not sure it will fit ( it did fit without the taper for 1/4 in of tread engagement .. .this should help to engage fully) other side is 1/4 barb but its "oversized" a bit so its really tight... should print flat with a brim but i line to add an angle with support so as to move the shear angle a bit. EDIT : reup a new file the other was way off! not tested so ... print at your own risk ;-)

Statistics

Category

Tags