Fishing float / bobber
Description
The fishing float consists of two main parts, which are connected by a Chupa Chups tube. The diameter of the tube should be 3mm and about 4-4.5cm long. A metal nut M6x1 is used as a weight, which is screwed onto the thread. The line can be threaded through a special hole in the float or wound once on the thread and slightly tightened with a nut. Filling 20%. Layer thickness 0.2mm. Wall thickness 0.8mm. Filament PETG. Be sure you turn on brim printing in options! Print the fishing float and top with bright colors. This model is for personal use only. This original model or replica is not for sale in any form!
Statistics
Likes
4
Downloads
0