Custom Fly Knife
Description
This is a butterfly knife I made for fun. All the parts are printable and require no external parts or tools. Well, maybe a hammer. To make this you will need to print: -2 Axles -1 Blade -1 Handle (Blade) -1 Handle (Blade) but mirrored in the slicer -1 Handle (Safe) -1 Handle (Safe) but mirrored in the slicer -2 Pin F -2 Pin M -2 Pin Stop -2 Spacer Assembly: 1. Put the Pin Stops in the 2 holes on the blade farthest from each other. 2. With the blade extended, attach the 2 Handles (Safe) to the hole on the top/flat side with an Axle. 3. With the blade extended, attach the 2 Handles (Blade) to the hole on the bottom/sharp side with an Axle. 4. Hammer the Pin F and Pin M together through the holes at the bottom of the handle and use a Spacer to keep the handles properly spaced. 5. That should be it; learn some tricks! (Sanding is highly encouraged for a better finish on the blade part. Best way is to print it blade side up and use supports on build plate only.)
Statistics
Likes
0
Downloads
0