Headphone Holder - Out of Sight out of Mind

Description

**Update 11/04/21** I've added a larger clamp (60mm inner diameter) and thinner Version of the headset attachement. The clamps and attachements are interchangable because the interface is identical in all versions! # Headset Holder - Out of Sight out of Mind Inspired by headphone designs such as [this](https://www.thingiverse.com/thing:1657541) or [this](https://www.thingiverse.com/thing:180851), I came up with a different mount better suited for my desk. And the best part is you can customize the clamp to fit to your needs! Simply print one of the HeadphoneAttachement files and a clamp and slide them together. No additional tools/parts required. **Headphone Attachement** I have provided the version with a cutout (like in the preview images) and a version without the cutout which should be easier to print. However, I did print the previewed version on my Ender 3 without problems. **Clamp** I used [this](https://www.thingiverse.com/thing:31982) parametric clamp file to tune the clamp to fit the feet of my desk which have a 40mm diameter. If your desk happens to be the same size, simply print the provided HeadphoneClamp.stl file. If it doesn't suit your desk, simply use the handy clamp customizer linked above and choose the design you need (e.g. you could add screw holes or increase the diameter, thickness etc.). Just make sure sure to set the following options: - base = true - base_thickness = 4.5 - base_width = 39 - height = 20 (to exactly fit the connector, but you can vary this) **Print** I printed the clamp with a 50% and the attachement with a 30% grid infill but you could probably get away with less than that. No post-print work necessary.

Statistics

Category

Tags