Custom Creation lightsabers Mk1
Description
This is my first lightsaber from the custom creation collection, the Mk1. Designed in Fusion 360, this should be easy to print within a couple of days. The only supports needed are for the emitter guards. There are 2 types of dowels used to help line all the parts up. Depending on how good your printer is, I uploaded both sizes just in case. All parts were glued together with Araldite which gives you a few minutes for adjustment. I recommend glueing only 2 emitter guards at a time, due to the others falling out whilst the glue sets. The inserts for the Pommel, Emitter and power block are a push-fit and should not need glueing. Here is a list of the number of parts needed: 1 x Emitter 1x Emitter insert 6x Emitter coil guard 1x Emitter coil 1x Main body 1x Pommel 10x Pommel inserts 2x Grip ring 1 2x Grip ring 2 3x Grip spacer 1x Power block 1x Power block insert 1x Power block strip 2.0mm 2x Power block strip 1.2mm 1x Button block 1x Button 3x 10x4 or 10x5 plug Enjoy the print & Build!
Statistics
Likes
9
Downloads
0