Filament Roller Guide 50 grad
Description
This is a REMIX from ID: 3052488 (I dont know why, it didnt show up in the Remix field) I made this remix for those who have the filament in another position. You can use the part. file to adjust the angle. This are 50 degrees and it´s basecally the same as the remixed file. You can use the other parameters or just select the profile: Dynamic Quality (0.16 mm) without any build plate adhesion. Please make sure and rotate the modell so that the bottom is touching the whole plate. So you prevent to use support. You will need to buy: 1 x 608 bearing 1 x M3x15 screw 1x M3 nut You will need to print: 2 x spacers 1 x bracket 1 x ring
Statistics
Likes
1
Downloads
0