Logitech G300s USB Cable Relief
Description
The strain relief on the G300s gaming mouse was pretty bad (my previous model died from this problem, and also the switches buts for an another build). I built this mechanism that wraps around the original usb connector and is secured to the connector with double sided tape and the halves are connected via superglue. The only thing thats needed is some long spring with an inner diameter of 4mm and a wire thickness of 0.5mm (note that the ends of the spring needs to be cut off for ease of mounting it to the cable and later to secure the ends to he plastic parts) After we secure the plastic parts, we insert one end of the spring to one end the the other to the other end and then assemble it
Statistics
Likes
3
Downloads
0