Foldable Auto-Rewind Spool Holder for Flying Bear Ghost 4S/5 with Direct Drive
Description
Spool holder, designed to fit the Universal Auto-Rewind Spool https://www.thingiverse.com/thing:3338467 on top of the Flying Bear Ghost 4S/5 printer. Useful if you use direct drive and print with soft and flexible filaments that don't like long PTFE tubes. Not that useful for heated chambers. Arms can be quickly folded or detached. You will need: - four M4x16mm screws (or longer) - two M4x20mm screws - two M4 nuts - two 608 bearings This uses the Z-rods top attachment screw nests to screw the spool holder to the printer. You'll need 4 x M4x16mm or longer screws to attach the holder and 2 x M4x20mm with 2 x M4 nuts to fix the foldable arms. **Don't unscrew both rods simultaneously!** Unscrew the first rod, add the spool holder arm and screw it back. Only then do it with the second rod so to keep the bed in place. Print from the original https://www.thingiverse.com/thing:3338467/files - spring (I've used SpringFlat_Modular_v3.4.stl) - clutch - dial - hub - 2 curved nuts Print new - axle - clip - filament guide - left arm bottom - right arm bottom - 2 arm tops - 2 knobs Supports are needed only for left and right arm bottoms.
Statistics
Likes
46
Downloads
0