Da Vinci 1 3D Printer - Hexagon Hotend with MK8 Extruder ver.1
Description
Please Feel Free To Donate Through Paypal To Jeeplvr2000@Yahoo.Com And I Will Keep The Designs Coming. This Allows You To Replace The Da Vinci 1 Hot End And Extruder With A "Hexagon" Hot End And "Mk8" Extruder. I Have Fully Machined Hardened X-Axis Shafts Available On Ebay Here, Http://Www.Ebay.Com/Itm/161719587675?Sspagename=Strk:Meselx:It&_Trksid=P3984.M1558.L2649 Update: 4/25/15 Added A Carriage Stl That Has Through Holes For Bushings Longer Than The Factory Bushings. "Davinci_W_Bush_Thru.Stl" Update: 3/10/15 Added A 15Mm "Bearing Spacer" Update: 2/13/15 I Added 3 New Files, 15Mmx.Stl, 16Mmx.Stl, Ext Cap With Conn.Stl. The First Two Are Of The Carriage With 2Mm Shaved Off The Bottom For Better Clearance Of The Bed Screws. The Third File Is Of The Stepper Cap With A New Area Cut Out For A Stepper With A Pin Connector. Update: 2/18/15 Added A Carriage That Uses The Da Vinci Bushings Instead Of The Linear Bearings.
Statistics
Likes
70
Downloads
0