Sony FS5 Grip Relocator
Description
This is a handgrip relocation kit I made to fit onto standard 15mm LWS rails. It allows the camera to be used as an ENG-style camera when shoulder mounted. The hand grip that comes with the camera sits somewhat in the same position that a handgrip from a traditional ENG lens would sit. To construct you will need: - Three M5 bolts of roughly 20mm length (8mm hex head) - Three M5 wing nuts and three M5 washers - One M6 bolt of roughly 25mm length (10mm hex head) - Possibly 5mm and 6mm drill bits to drill out the holes to size if the bolts don't go through easily (depends on printer accuracy) - A LANC extension cable. Smallrig makes one that works great. Gently tap the bolts in place with a hammer.
Statistics
Likes
1
Downloads
0