Seedling Raising Kit
Description
A seedling tray kit, which will print on a 3d printer that has at least a 150x150 bed. The seedling pots have a push out bottom to make it easier to remove the seedlings. The seedling tray insert holds the pots and allows them to drain into the tray below when watering. Kit Consists of: <ol> <li>Seedling Pots</li> <li>Seedling Pot base inserts</li> <li>Seedling tray insert to mount 9 pots and allow for drainage</li> <li>Seedling Tray to catch any drainage water</li> <li>Seedling Watering can (with lip to help stop drips)</li> </ol> All print without supports (make sure seedling tray insert is printed with the drainage feet pointing up (i.e. upside down). All ok with 15% infill. Maybe increase the infil for the watering can a little, but still ok with 15%, unless you crush cans with your hands for a living. I printed with 3 bottom layers, 2 shells and 4 top solid layers. I'm sure it would be fine with 2 all around.
Statistics
Likes
4
Downloads
0