Logitech LOGI c270 / c505 webcam cover
Description
Logitech webcam cover for C505 ( probably also for C270 ). Cover consists of 3 parts. Glue is not needed, but can be used if you like. The cover covers the lens and the mic, but not the LED so when the cover is closed you still can see if the webcam is turned on or off. The origal front plate need to be removed to mount the webcam cover. If the parts are difficult to assemble, it will most ikely be due to the material shrinkage. I have adjusted the dimensions of the print compared to the actual measurements because I kept a shrinkage over the length of 0.4 to 0.5 mm. It now fit perfectly using the print settings mentioned below. My printer settings: Material: Standard PLA black Printing temperature: 200 Build Plate temperature: 40 Build Plate Adhesion Type: Brim Infill Density: 20% Fan Speed: 100%
Statistics
Likes
39
Downloads
0