Virtual Boy - TriPod Adapter and Quick Release Adapter
Description
Have you ever wanted to play your Virtual Boy, but never found a comfortable way to do so, or perharps wanted to use a better stand to hold your Virtual Boy. Well with this Adapter you can. It both adapts the Virtual Boy mounting point to something which you can screw into, and includes mounts for a tripod screw, or a tripod quick release. If you don't have a printed check out my stores, I sell some of my designs printed with everything you'll need: etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore Required parts include: 2x 10-32 1/2" Oval Machine Screws (optional) x2 10-32 Nut 1x 10-32 1" Machine Screw 1x 10-32 Wing Nut There are 2 ways to print this model each with it's own print settings: 1) Quick print The Quick Print uses the: Virtual Boy Adapter Body (Printed with the holes on the bottom) VB B Clam (Printing on it's side) And the Tripod mount of your choice. Print each part as suggested you might need supports for the top part of the adapter, and once printed place the 1" machine screw into the adapter and screw it in (you'll need a thin and long screw driver) Place the B Clamp into the machine screw and place the wing nut behind it. This will be used to clamp the virtual boy to the adapter. Finally attach the mount to the bottom of the adapter with the 2 1/2" Machine screws, hammer in the nuts for a more secure print. 2) The 2cm print The 2cm print has more parts but is shippable by Canada Post, and stronger since the arms which holds the Virtual Boy is printed along the potential force. Print the A and B Clamps on their sides and the Adapter on it's bottom. When done place the 1" Machine screw in the hole on the Adapter put the Plug in after it, and hammer in a 10-32 machine screw from the top. This holds everything in and attaches the A Clamp to the Adapter. Screw a 1/2" machine screw into the A Clamp and screw that into the adapter til snug. Now place the B Clamp into the 1" Machine screw from the adapter and place the Wing Nut behind it. Finally take 2 1/2" machine screws into the bottom of the adapter, and screw in the mount of your choice. Hammer in 10-32 Nuts before for a more secure fit.
Statistics
Likes
5
Downloads
0